Prototyping for Habitat

From XPUB & Lens-Based wiki
Revision as of 12:23, 18 November 2021 by Jacopo (talk | contribs) (Created page with "==Raspberry Installation== → https://pzwiki.wdka.nl/mediadesign/The_Ultimate_RPi_Installation_Guide <br> 1. Download an OS image file * RASPBIAN: https://www.raspberrypi.org...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Raspberry Installation

→ https://pzwiki.wdka.nl/mediadesign/The_Ultimate_RPi_Installation_Guide
1. Download an OS image file

2. Put image on SD Card

  • Open terminal
  • Find the disk that you are going to write to
diskutil list
  • Find the disk /dev/disk<number>
  • You need to unmount the SD Card before imaging
sudo diskutil unmountDisk /dev/disk<number>
  • Then to image the disk with your image put in the following command
sudo dd bs=4m if=/path/to/your/image.img of=/dev/rdisk<number>

3. Enable SSH on the Pi

With a screen + keyboard

  • Connect the Pi to a screen and keyboard.
  • Run: sudo raspi-config
  • Select Interfacing Options
  • Navigate to and select SSH
  • Choose Yes
  • Select Ok
  • Choose Finish

4. put the SD card back in the Pi and boot it up


Retrieved from "https://pzwiki.wdka.nl/mw-mediadesign/index.php?title=Prototyping_for_Habitat&oldid=203061"