This page is about my camera that I built in the Thematic A Focal Camera Workshop

Idea

I wanted to explore making photos similar to the lenticular technique:

Lenticular example

That means that I lasercut a stripe-shaped mask that would be placed in front of the Negative. This shape would be movable between to positions. After exposing the first half I would move the striped shape to the second position and expose the missing parts of the negative. To make sure that the photo will have sharp edges later on the photo the mask (transparent paper) has to be very close to the photopaper. Additionally, the pattern hast to be painted matte-black, like the inner housing of the camera.

Execution

In the workshop we learned, that each optic can be convex, concave, or planar. We talked about magnification and aberration and on how to combine two optics in right distance to get a working, sharp lens.

To make the pattern appear sharp on the film, it needs to be in direct contact with it. To keep the camera light-tight while inserting something so close to the film I made thin slits in the top and bottom of the camera back, right at the depth of the film. I inserted a (very) long strip of thin plastic foil, like the ones used to draw on for overhead-projectors.

Then I printed various striped patterns on transparent paper and inserted it from top to bottom through the camera. This way I had the ability to shift it by pulling it down or up.

Outlook

To improve it even more I want to make marks to see how much it is needed to pull it up / down to make the pattern be in the right place. Also, I want to try other shapes like diagonal stripes, zig-zag lines, circles and so on…