Wang SI24

Loitering is about trust

When human going out of their shelter, they hunting the external information for their brain.

If loitering is a bridge connecting us (animals) to our surroundings (space), do we trust this bridge?

As an animal, Do you Trust the Space for loitering?
As a space, Do you Trust the Animal doing the loitering?

As a Space for Animal

 int Space = City;

Do you trust the Space for loitering?
How does the space accommodate animals to loitering?

The Mosquito

The Mosquito or Mosquito alarm is a machine used to deter loitering by emitting sound at high frequency. In some versions, it is intentionally tuned to be heard primarily by younger people. Nicknamed "Mosquito" for the buzzing sound it plays, the device is marketed as a safety and security tool for preventing youths from congregating in specific areas.

Data Collection and Analysis for Public Spaces

The "Footfall Almanac" examines the redesign of the Muntplein in Brussels, highlighting its transformation into a versatile, readable public space. The square, central to civic and commercial activities, underwent a redesign in 2012 to enhance its usability and integration with surrounding areas. Surveillance mechanisms, such as CCTV and wireless tracking, monitor pedestrian movements, raising privacy concerns. These systems, used for security and retail analytics, reveal tensions between public space optimization and individual privacy.
https://constantvzw.org/site/IMG/pdf/footfall-almanac-2019-lores.pdf

Checking point

In games, checking points are saving the player’s state, so they could resume the point if they fail.

The Camera zone I found during the loitering inspired me to make a map or pathway. By accepting cookies, you will navigate through various camera zones. You can do this by scanning QR codes or using GPS record settings at each camera zone checkpoint. This will generate an individual path for you although you will never see the saved image captured by the government.

I want to make a map about the camera zones in the city, related to the checking points in the games, using the camera zone as a checking point to connect the path, also explore the relationship between the player and the people behind the monitor.

In the map, the path that the player takes will leave no traces, but the camera zones will leave traces as checkpoints that save the player's status.

Path setting

Rather than a map of linear way like monopoly, the Checking point is fill with more random open positions, to set the path blank.

Like the monitor screen, each checking point is a moment record, with blanking space between the each Record area, we could connect the each area to a random connection/structure.

https://www.stanza.co.uk/timescraper/index.html

Ge Yulu - Eye Contract

Ge Yulu’s 2016 project Eye Contact, Ge positioned himself in front of a surveillance camera and stared directly into the lens for hours, then negotiated with a security guard to buy the footage. “It represented the elimination of the barriers separating us,” Ge told Ding Yining and Shi Yangkun for Sixth Tone. “When the guy copied the clip for me, he was no longer part of the system.” He said, "I searched for surveillance cameras nearby, set up a tripod, climbed to a close distance with the surveillance camera, and then faced it directly. Normally, surveillance is to watch over us, but can't I also watch it? Here, what I question is a kind of surveillance power. I can't make any substantive changes to it; I just stare at it. I strive to stare for a few hours to make the person watching me from behind aware or to have a moment of eye contact between us. I feel that would be great. I think it's a romantic thing because every day, someone watches these streets behind the camera. Suddenly, when two pairs of eyes meet, I feel there will be a moment of warmth."

As an Animal for Space

 int Animal = Human;

Protocols for loitering

At the beginning, we make the protocol for loitering, exchange the protocol and recording the things we found during the loitering.

Protocols for loitering

Loiterers filming us loitering

Helicopter

As an unstable factor, interfering factor

Do you trust the Animal that loitering?

In this section, we consider humans as an unstable factor that can infect the Space. They are set to break the order as unstable elements and are being evicted.

• Using the protocol, I keep walking in the center, looking for a group of people. Until I find a group of tourists, I pretend to be one of them, walking with them in a straight line and taking pictures of the square house.
• Wearing a metal tab under the shoes, snipe-walk through the quiet community without making any noise even meet someone drinking beer in the yard, pretend to be an extra actor from The Walking Dead.
• Using a specific frequency, to connect with people walking forward to different direction.
• Randomly ring the bell at any door, record the sound, and run as fast as you can.

Broken Bell

Printed Window and Door

Metal Tab

A frequency

As a traffic controller, make the world safer.

A Walk with the Red Line / Ein Spaziergang mit der Roten Linie

(Details might be wrong, I didn't find more archives about this performance.)

During the Rundgang 2024 at HGB Leipzig, I saw a performance by a Chinese performance artist Haiguang Li. He loitered around the American Embassy from 3 pm to 7 pm, which is directly across from HGB. Visitors watched this performance through a small window on the 3rd floor of HGB. The connection between the visitors and the performer was gazing through this window.

As he loitered, the guards at the American Embassy began to notice him and started walking alongside him across the fence.

In this performance, the unstable loitering connected the guards and the visitors gazing through the window, creating a subtle connection.

As a different Animal

Loitering as another species, providing a different perspective and experience. Like the game "Stray", players could navigate the world as a cat. This loitering concept could expanded to various species, a high mobility bird or a fish surfing in the river.

As a TV remoter

Midi Controller

Research

Main Idea

Rain Receiver is actually a midi controller but just by using sensor.

Most logic of a MIDI controller is to help users map their own values/parameters in the DAW, using potentiometers, sliders, buttons for sequencer steps (momentary), or buttons for notes (latching). The layout of the controls on these devices usually features a tight square grid with knobs, which is a common design for controllers intended for efficient control over parameters such as volume, pan, filters, and effects.

I would like to make some upgrades in the following two ways:

the layout

During an period of using pedals and MIDI controllers for performance, I've organized most of my mappings into groups, with each group containing 3 or 4 parameters.

For example,

the Echo group includes Dry/Wet, Time, and Pitch parameters, the ARP group includes Frequency, Pitch, Fine, Send C, and Send D.

In such cases, a controller with a 3x8 grid of knobs is not suitable for mapping effects with 5 parameters, like the ARP. A structure resembling a tree or radial structure would be more suitable for the ARP's complex configuration.

The structures, such as planets and satellites, demonstrate how a large star can be radially mapped to an entire galaxy; A tiny satellite orbiting a planet may follow an elliptical path rather than a circular one; Comets exhibit irregular movement patterns. The logic behind all these phenomena is similar to the logic I use when producing music.

the function

With more creative Max for Live plugins and VST plugins being developed, some require more than just potentiometers, sliders, and buttons for optimal use. For example, controlling surrounding sounds needs a 360-degree controller, which does not map well with a potentiometer that operates on 0-127 values. However, a joystick, which maps to both X and Y axes simultaneously, could provide a better experience.

I would like to add a joystick, touchpad, LDR, or sensors to improve the user’s experience.

further steps

Puzzle blocks game

when I'm drawing the drafts, I still thinking about block game, use the wood stick/block to make a real puzzle game, so the logic is let the sliders influence each other in a physical way. The sliders will became to a path, some slider will also not able to use when the other sliders are occupied the place.

To build a puzzle blocks midi controller, I still need:

- [ ] Buy sliders for about 9 or more.

- [ ] Cutting Wood blocks in wood station.

- [ ] Design the puzzle path.

Issues

In the process of changing the way of controlling sound, the core logic is to build a connection(mappings) of various items. Same as the Html sound experiment.

Chips like the UNO are tricky because they can't use 'midiusb.h'. The MIDI signal is hard to recognize even with Hairless MIDI. I could use the Standard Firmata with the Max plugin, but the value of the potentiometer is not stable. I attempted to add a 'potThreshold' but don’t know how to modify the Standard Firmata.

In this case, I have to switch to Leonardo or Micro.

Reference

https://dartmobo.com/dart-kombat/

https://www.matrixsynth.com/2017/01/polytik-new-project-via-artists.html

https://bleeplabs.com/product/thingamagoop-3000/

https://folktek.com/

https://blog.arduino.cc/2023/03/31/old-rc-transmitter-becomes-new-midi-controller/?queryID=5ebba10b6406db9f3f39c8b3b7142158

https://www.bilibili.com/video/BV1Bj411u72k/?spm_id_from=333.788.recommend_more_video.0

https://www.bilibili.com/video/BV1wx4y1k7pc/?spm_id_from=333.788.recommend_more_video.-1

https://www.youtube.com/watch?v=a8h3b26hgN4

https://ciat-lonbarde.net/ciat-lonbarde/plumbutter/index.html

Insperations

Stars

Chains/With saw gear

Layer

This could use a Dual potentiometer from the Guitar.

PCB etching

For patterns, and touch function

Format

A moving midi controller, using the same parameter to control the move, but then I’ll need a controller to control the midi controller.
A clock with various LDR, activated by the second clock pointer. This could become a clock sequencer.
A sandbox with buildings or cars or trees, the model will be the knob of the potentiometer.
A controller to hold, with several buttons on it.

Exterior

the box probably needs to use plastic but not iron(too heavy), or wood(not stable, even through wood still needs the laser cut) maybe the acrylic board.

Components

6-8 knobs for potentiometer;
4 or 8 buttons;
a slider or two?
Maybe a LDR?(but how to map the LDR to midi signal??- maybe a button to active the LDR, and a light to show of the LDR is turn on or off, and when using the LDR is the same logic to map in the live. But is the LDR need a cover?)
A arcade joystick potentiometer for controller the 360 degree values like the surrounding sounds.

ADXL345 - 3 axis(for the Hands)

Boards/Chips

Arduino Leonardo / Pro micro. Multiplexer

Code

with the modify X3 version the buttons and potentiometers are finished but still don’t know how to add the slider and the joystick.(for the Ableton live mapping part actually is not a problem, just need to map to the X and Y, the circle is just a appearance. So it is important to get the X and Y parameter from Arduino and transfer to the midi format.)

  #include <MIDI.h>
  #include <ResponsiveAnalogRead.h>
  const int N_POTS=3;
  int potPin[N_POTS] = { A1, A2, A3};
  int potCC[N_POTS] = {11, 12};
  int potReading[N_POTS] = {0};
  int potState[N_POTS] = { 0 };
  int potPState[N_POTS] = { 0 };
  int midiState[N_POTS] = { 0 };
  int midiPState[N_POTS] = { 0 };
  const byte potThreshold = 6;
  const int POT_TIMEOUT = 300;
  unsigned long pPotTime [N_POTS] = {0}; 
  unsigned long potTimer [N_POTS] = {0};
  float snapMultiplier = 0.01;
  ResponsiveAnalogRead responsivePot[N_POTS] = {};

void setup() {

 Serial.begin(9600);
 MIDI.begin(MIDI_CHANNEL_OMNI);
 for (int i = 0; i < N_POTS; i++){
   responsivePot[i] = ResponsiveAnalogRead(0, true, snapMultiplier);
   responsivePot[i].setAnalogResolution(1023);
 } 
  }

void loop() {

 for (int i = 0; i < N_POTS; i++){
   potReading[i] = analogRead(potPin[i]);
   responsivePot[i].update(potReading[i]);
   potState[i] = responsivePot[i].getValue();
   midiState[i] = map(potState[i], 0, 1023, 0, 128);
   int potVar = abs(potState[i] - potPState[i]);
   if (potVar > potThreshold){
     pPotTime[i] = millis();
   }
   potTimer[i] = millis() - pPotTime[i];
 if(potTimer[i] < POT_TIMEOUT) {
     if (midiState[i] !=midiPState[i]){
       Serial.print("Pot ");
       Serial.print(i);
       Serial.print(" | ");
       Serial.print("PotState: ");
       Serial.print(potState[i]);
       Serial.print(" - midiState: ");    
       Serial.println(midiState[i]);
       MIDI.sendControlChange(potCC[i], midiState[i], 1);
       midiPState[i] = midiState[i];
     }
       potPState[i] = potState[i];
   }  
 }
  }

shopping list

leonardo

expander cd4067

potentiometer 6

buttons

mpr121

joystick

slider

ledbutton

Process

Step 1: Design the hardware logic/function

• Joystick: Controls X and Y axes.
• 3mm White LED: Shines with changes in X and Y values, indicating the joystick's rate.
• Buttons: Divided into two groups by pitch.
• Button LEDs: Shine when the sequencer mode is on; light up when the Hold mode is on.
• Toggle Switch 1: Pitch shift (+12/-12) for Group 1.
• Toggle Switch 2: Pitch shift (+12/-12) for Group 2.
• Toggle Switch 3: Left position: Sequencer mode; Middle position: Mono mode; Right position: Hold mode.
• Rotary Encoder Potentiometer: Controls the tempo when the sequencer mode is active.

Step 2: Test the basic functions with components

• The joystick can control any parameters in Ableton Live, including the surrounding sounds.
• The buttons function correctly for playing notes or activating items on/off.
• The toggle switches can shift pitch and control function modes.

Step 3: Design the front panel

Design the front panel with references to the solar system and universe exploration drafts. Connect the two parts based on a visual system.

Draft about the drill positions

Step4: Aluminium board drill

• 4.1: Cut a 15cm x 32cm piece from the aluminium board.

• 4.2: Print the marks for drilling.

• 4.3: Attempt CNC milling - Failed-not possible to use on metal material, only wood.

• 4.4: Attempt laser cutting - Failed-aluminium board is too thick.

• 4.5: Start using hand tools: first, drill the circles in the square, then use a metal file to grind off the edges. Use different sizes of drills to drill all the circles on the board.

• 4.6: Grind and test the size of each component.

Step5: Print the final pattern on it use the UV printer

• 5.1: Using the UV printer to directly print the pattern is tricky if you have a design like this. I think it’s better to print it first and then drill according to the printed pattern, as it’s hard to align the patterns with the holes. The colors turned green and blue, and the positions were all wrong during the first attempt, so I had to remove all the print.

• 5.2: The second time, I separated the layers to print twice. I printed the black layer first, reversed the color of the white patterns and overprinted on the black layer. Although the positions were still a bit offset, the color was much better than the first time.

Step6: Soldering the wires.

how I soldering

To solder better the two multiplexers on the Arduino, I removed the headers on the Arduino, but broke some digital pins on it during this process which causing the connection is unstable, and make the situation harder as I have a very limited digital pins.

I’m very regret.

Step7: Coding.

I’ve been test the first multiplexer with the buttons, joystick and two toggle switch. The function is working well. The other part with the Display and Encoder is also working well individually.

After I soldered these together the issue coms out, I don’t know how to handle two multiplexer at one time, to define the second multiplexer as MUX2 or what. And with the bad connection of the broken digital pins on Arduino, I don’t even know the current issue is about code or connection.

Javascript Club - Gamepad/Midi API

Joining Rosa's JavaScript club has been really inspiring and helpful. I think I finally found a way to link the HTML I made last trimester with physical controls.

Gamepad to control the Helicopter

I tried to use the gamepad to control the cursor at first, the movement is easy to map but the click/mouse down/mouse up is hard to simulate, with my broken coding, I failed and came up with more stupid ideas, use the WASD key to control the helicopter then map the Index 0,1,2,3,4,5 to the WASD and J K(which also failed at the end and took more time).

Protocol:

1, Key control - using WASD to control the helicopter.

2, Replace the draggable by key control in the main codes, also add the J and K to control the fill and drink.

3, Map the Index 0,1,2,3,4,5 of the gamepad to the WASD and J K - Failed

4, Using the same approach of key control, let the values of the helicopter movements echo to the Index 0,1,2,3,4,5 == button pressed.

In the end, I got a Beer Robber version with both able to use key and gamepad control.

Midi controller to control the slider block

At first I meet some issues that the midi controller is only controlling the slider(css) moving but not able to control the sound values, I found the midi code part is outside of the pitch loop, which caused the effect not able to defined.

After the issue fixed, I also mapped the buttons to control the pitch blocks in the html.

https://hub.xpub.nl/chopchop/~wang/__lab__/files/public_html/RE3%20MIDI.html?_xsrf=2%7Ce2ae7386%7C5af0ce2c1735f7814fb3b50b6e485ca6%7C1713860808

Browser extensions/PMoMM

The Browser Sound plugin is a browser-based tool that adds various effects to your audio and video.

This browser-based plugin could easily accessing samples for your projects.

Unlike plugins in digital audio workstations (DAWs), this plugin operates directly in your web browser. It will distort your audio or video when you play them in the browser.

Regarding my recent experiments, I've been using pizzicato.js for sound experiments, but I've found the selection of sound sources to be limited.

To address this limitation, I'm interested in creating a browser-based plugin that allows users turn the Browser into an instrument, a sampler, by searching and using their own samples from various websites and platforms.

https://pad.xpub.nl/p/BRNP

What is it?

The Browser Sound plugin is a browser-based tool that adds various effects to your audio and video, which could easily accessing samples for your projects.

Why make it?

1,The plugin addresses the limitation of traditional DAW by providing users with a convenient way to access and manipulate audio samples directly within their web browser. 2,It could expand the possibilities of sound experimentation, allows users turn the Browser into an instrument, a sampler, by searching and using their own samples from various websites and platforms.

Workflow

1, Research on the browser plugins. 2, Sound design part, list the effect could be using on the sampler, design the audio effect chain. 3, Coding part on browser extension. 4, Based on the coding part to fix the sound design. 5, Interface design for the plugin. 6, Based on the Interface design to redesign the code logic. 7, Test and fix any bugs. 8, Using the plugin to record a sound file.

Timetable

Total: 22 days 12 h 0 min 0 s. 1, Research: 3 days. 2, Sound design part: 3 days. 3, Coding part: 5 days. 4, Interface design: 3 days. break: 12 h 5, Bug fixing: 5 days. 6, test and record: 3 days.

Previous practice

Regarding my recent experiments, I've been using pizzicato.js for sound experiments, the sound source is using the SineWave with different frequencies, but I've found the selection of sound sources are limited, it should be able to use any audio source from the another websites and platforms.

Relation to a wider context

The Browser Sound plugin contributes to the broader landscape of digital audio production tools by offering a new approach to sound manipulation and sampling. It bridges the gap between traditional DAWs and web-based platforms, providing users with innovative ways to create and manipulate audio content.

Part II 17/04

I'm sticking with my focus on developing the "browser plugin" and finding ways to expand its functionality. As part of the project, I'm starting with research to gather insights and ideas.

Regarding references

I've explored feedback and found inspiration from projects like Pellow, which explores creating sound from browser- based data, and MIDI controllers, which could potentially be integrated to control the plugin. Experimenting with multiple browser tabs to a mixer is an interesting way to explore.

Accessibility

I've also thought about accessibility factors for the web page. Have you considered features like Speech to Text? There are existing browser extensions like Read in the Dark, Read Aloud, and Zoom In/Out that enhance accessibility. For sound-related extensions, most focus on volume enhancement or equalization, leaving room for a plugin with effects like tremolo, phaser, distortion, or even a sampler recorder, as suggested by Senka.

Does it has potential?

I think there's still some potential for the plugin, especially given the existing landscape of browser extensions and the need for more diverse sound-related tools. Im started working on it, and I'm considering using a simple JSON file and possibly an API to facilitate its development.

Part III 24/04

In the first step, I tried adding pizzicato.js to both the popup.html and background.js files, but meeting issues with it not being defined. Despite trying with a lot different approachs, even copying all the code directly into the background.js, the problem persisted.

When I adding the url src rather than library, I found there a CDN issue from the console, which is means with the Manifest version 2.0, Chrome is not able to accept using the external javascript to modifying real-time audio from tabs, due to "security restrictions", to protect user privacy and prevent malicious extensions from capturing sensitive audio content.

In this case, I have to try to use the Audio API to make this extension.

Readers

https://www.researchgate.net/publication/303728799_Tactical_urbanism_Short-term_action_for_long-term_change

https://www.frontiersin.org/journals/psychology/articles/10.3389/fpsyg.2017.01130/full

https://www.google.nl/books/edition/The_Society_of_the_Spectacle/uZcqEAAAQBAJ?hl=en&gbpv=0

https://isinenglish.com/1-6-contribution-to-a-situationist-definition-of-play/

https://monopolyleeds.com/?utm_source=leeds-list&utm_medium=content&utm_campaign=2024-04-leeds-bid-monopoly-teaser-preview

https://en.wikipedia.org/wiki/Guerrilla_gardening