User:Simon/Trim4/tools/chdk firmware installation

From XPUB & Lens-Based wiki

documentation from erg pad on installing chdk firmware for the bookscanner

  • ERG BOOK SCAN*

Doc de base: http://diybookscanner.org/archivist/

Doc pour erg: https://docs.google.com/document/d/1ZFgxLRWM-amLoyrPdKVwJJwBGfQBsEq3rNSjX41_mL4/edit


Budget: https://lite.framacalc.org/ergbookscan


Fourniseurs : bois 

   Gédé boishttp://www.gedebois.be/
   Lochten & Germeaux http://www.lochten.be/

verre - vitrerie Defise — Rue de Mérode 459, 1190 Forest — 02 537 20 24 - https://fr.glassolutions.be/fr-be/planiclear

ce qu'il manque:

velcro 2x poulies de 5 cm de diamètre: Industrial product chaussée de Ruisbroek

le verre : vitrerie Defise - rue de Mérode 1190 4mm rodé d'un coté à 45°

électiricite: cable 220v prise 



   https://www.brico.be/fr
   https://www.youbuild-mpro.be
   https://www.gamma.be/fr
   https://www.lochten.be/
   https://www.hubo.be/fr.html
   https://www.mr-bricolage.be


software

notes from PZ: https://pad.xpub.nl/p/bookscanner-software

Install piscan on SD: 

   https://github.com/Tenrec-Builders/pi-scan
   https://www.raspberrypi.org/documentation/installation/installing-images/linux.md

Prepare SD cards for camera: 

   https://chdk.fandom.com/wiki/Prepare_your_SD_card
   CHDK instructions
   
   Download the correct firmware according to your camera model
   
   http://www.mighty-hoernsche.de/
   
   Method 2 - Using CHDK itself to make the SD card bootable.

   Start out with your SD Card Lock switch in the unlocked position (the small slide switch on the side of the card - see picture above - make sure it is in the unlocked position to start this process.)

   Low level format the card in camera using the camera's built-in card format menu selection. Warning : any images on the card will be erased at this point. 

   Remove the card from your camera and put it into the SD card reader of your PC.

   The card should now contain a single FAT32 partition. If you are using a large SD card,  please make sure your camera did not format the card as exFAT - see warning note at start of this section.  You may need to use something like FAT32 Format to reformat the card in your PC if so. 

   Now please check again (by looking at the properties of your card in an SD card reader in your PC) to ensure that your card is formatted either FAT16 or FAT 32 - and not exFAT!

   Unpack the appropriate build of CHDK for your camera and firmware version directly to the card (including all subdirectories).

   With the Card Lock switch still in the unlocked position put the card back into your camera.

   Turn on your camera by pressing the Play button (or using the Play switch on some cameras). Do not start the camera with the On/Off switch or this process will not work.

   Reset factory settings on the camera in order to enable the firmware update setting (if it's not there already)

   Start CHDK manually by selecting the Firmware Update option in the Canon menus.

   After the CHDK logo briefly displays, start CHDK by using the <ALT> key sequence for your camera.

   Enter the CHDK menu (press play button and then MENU for the CHDK menu), and select Miscellaneous stuff -'> SD Card' -> Make Card Bootable

   Turn your camera off, write protect the SD card by moving the little switch on the side of the card to the lockedposition, insert the card back into your camera.  Note that CHDK will cause the camera to ignore the lock switch so that you can take pictures normally.


adjust the cameras: 

   http://tenrec.builders/archivist/camera-guide.html

laptop, python 2.7 requirements Cython pip install git+https://github.com/kivy/kivy.git@master dbus-python chdkptp.py pygame


luarocks install chdkptp

Retrieved from "https://pzwiki.wdka.nl/mw-mediadesign/index.php?title=User:Simon/Trim4/tools/chdk_firmware_installation&oldid=174083"