Prototyping/2019-10-16

From XPUB & Lens-Based wiki

Starting with a very simple program...

void setup() {
  tone(11, 220, 60);
  delay(100);
  tone(11, 440, 60);
  delay(100);
  tone(11, 880, 60);
  delay(1000);
}

void loop() {
}

How do frequencies relate to tones... See Piano key frequencies

Piano_key_frequencies.png

Incrementing 3 ways

All 3 are ways to add 1 to the variable x.

x = x + 1
x++;
x += 1;


Simple counting loop (while loop)

Counting to 10 with a while loop...

Three main parts,

  • Initializing the variable
  • The "control" in the while (....)
  • Incrementing
void setup() {
  int counter = 0;
  while (counter < 10) {
    tone(11, 440, 50);
    delay(1000);
    tone(11, 220, 50);
    delay(1000);
    counter = counter + 1;
  }
}

void loop() {
  // put your main code here, to run repeatedly:
}


full text with Serial tracing

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  Serial.println("hello");
  
  int counter = 0;
  Serial.print("YOUR Kounter is now ");
  Serial.println(counter);
  
  while (counter < 10) {
    tone(11, 440, 50);
    delay(1000);
    tone(11, 220, 50);
    delay(1000);

    counter = counter + 1;
    Serial.println(counter);
  }
}

void loop() {
  // put your main code here, to run repeatedly:

}

Simple counting loop (for loop)

Counting to 10 with a for loop...

Same three parts:

  • Initializing the variable
  • The "control" in the while (....)
  • Incrementing

But written in "short hand" in the form:

 for (initialize; condition; increment)
void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  Serial.println("hello");
  
  Serial.print("YOUR Kounter is now ");
  
  
  for (int i = 0; i < 10; i++) {
    tone(11, 330, 10);
    tone(11, 440, 50);
    delay(1000);
    tone(11, 220, 50);
    delay(1000);
    Serial.println(i);
    
  }
}
void loop() {
  // put your main code here, to run repeatedly:
}

Change inside the loop

Loops are more interesting when something is changing among the repetition.

Variation 1: use the counter variable in some way to set a frequency value

Variation 2: use a separate variable

Play a scale

int Note;
int tones [] = {31, 33, 35, 37, 39, 41, 44, 46, 49, 52, 55, 58, 62, 65, 69, 73, 78, 82, 87, 93, 98, 104, 110, 117, 123, 131, 139, 147, 156, 165, 175, 185, 196, 208, 220, 233, 247, 262, 277, 294, 311, 330, 349, 370, 392, 415, 440, 466, 494, 523, 554, 587, 622, 659, 698, 740, 784, 831, 880, 932, 988, 1047,  1109, 1175, 1245, 1319, 1397, 1480, 1568, 1661, 1760, 1865, 1976, 2093, 2217, 2349, 2489, 2637, 2794, 2960, 3136, 3322, 3520, 3729, 3951, 4186, 4435, 4699, 4978};
void setup() {
Serial.begin(9600);}

void loop() {
  for (int Note = 0; Note<100; Note++) {
    tone(11, tones[Note]);
    delay(50);
  }
  Serial.println (Note);

}

Play with NOTE NAMES

Play a pattern