Chiplotle

Chiplotle is an HPGL plotter driver that implements and extends the HPGL (Hewlett-Packard Graphics Language) plotter control language. It provides direct control of your HPGL-aware hardware via a standard usb<->serial port interface. Chiplotle is also a general purpose vector drawing library with functions for creating and transforming shapes, which can then be sent directly to your HPGL plotter for printing.

Chiplotle is written and maintained by Víctor Adán and Douglas Repetto.

• Main web page: http://sites.music.columbia.edu/cmc/chiplotle/
• Documentation: https://chiplotle.readthedocs.io/en/latest/index.html
• More documentation: http://sites.music.columbia.edu/cmc/chiplotle/manual/chapters/tutorial/intro.html

Use

Connect to plotter to computer with usb.

Start the plotter.

Wait! until the plotter is fully running.

Activate the venv you made.

In Linux:

$ source FOLDERNAME/bin/activate

In Windows (using Powershell):

$ FOLDERNAME\Scripts\Activate.ps1

Now you can start chiplotle:

$ chiplotle3

It should automatically detect the plotter...

If it doesn't, you can try to turn the plotter on and off, or load paper.

Once the plotter is detected, you can send a HPGL file to plotter:

plotter.write_file('FILENAME.hpgl')

When you're done, close chiplotle with:

exit()

---

Install

Install pip, venv

First install pip and the virtual environment python module, if you don't have them yet.

On Linux:

$ sudo apt install python3-pip
$ sudo apt install python3-venv

On Mac and Windows:

follow the instructions at https://www.python.org/.

Make a virtual environment

On Linux and Mac:

$ python3 -m venv FOLDERNAME

For example:

$ python3 -m venv plotter-venv

On Windows:

py -m venv FOLDERNAME

For example:

$ py -m venv plotter-venv

Activate the virtual environment

On Linux and Mac:

$ source FOLDERNAME/bin/activate

On Windows (using Powershell):

FOLDERNAME\Scripts\Activate.ps1

You can exit again by writing deactivate.

Install Chiplotle

Install Chiplotle inside this virtual environment (the Python library to speak HPGL to the plotter):

$ pip install Chiplotle3

Run Chiplotle

See #Use.

---

Errors

Windows: Script Execution Policy

See: https://www.makeuseof.com/enable-script-execution-policy-windows-powershell/

Mac: ImportError: module not found "imp"

?

Windows: "port" not found (?)

File "C:\Users\aless\OneDrive\Desktop\PENPLOTTER_venv\lib\site-packages\serial\serialutil.py", line 268, in port
   raise ValueError('"port" must be None or a string, not {}'.format(type(port)))
ValueError: "port" must be None or a string, not <class 'int'>

Alessia and Manetta spend an hour on this error on Nov 13th 2023, but did not figure it out. There is little documentation on using Chiplotle on Windows unfortunately. A next step could be do open serialutil.py to see if the error can be resolved directly there.

It's the next day now, we looked into this again and solved it!

First, edit your Chiplotle config file, which is stored in your home folder, which you can edit on Linux/Mac with:

$ nano ~/.chiplotle/config.py

or on Windows:

> notepad C:\Users\USERNAME\.chiplotle\config.py

Change this line:

serial_port_to_plotter_map = None

into:

serial_port_to_plotter_map = {'COM4' : 'HP7475A'}

or use another plotter model number.

Secondly, you need to also edit a Python script within the Chiplotle library, which you can open on Linux/Mac with:

$ nano PATH-TO-YOUR-VENV/chiplotle3/src/chiplotle3/plotters/baseplotter.py

or on Windows:

> notepad PATH-TO-YOUR-VENV\chiplotle3\src\chiplotle3\plotters\baseplotter.py

Then edit the following on line 196:

@property
def _buffer_space(self):
    self._serial_port.flushInput()
    self._serial_port.write(self._hpgl.B().format.encode())
    bs = self._read_port()
    return int(bs)

and just change the last line:

@property
def _buffer_space(self):
    self._serial_port.flushInput()
    self._serial_port.write(self._hpgl.B().format.encode())
    bs = self._read_port()
    return int(128)

Now Chiplotle should work.

Raspberry Pi

Numpy error:

libopenblas.so.0: cannot open shared object file: No such file or directory

Install the missing library:

$ sudo apt install libopenblas-dev

See also

• Pen plotters