Printing/xml-plotter-2: Difference between revisions
| Line 4: | Line 4: | ||
* carlos is a BBC Goertz Metrawatt SE-283. | * carlos is a BBC Goertz Metrawatt SE-283. | ||
* carlos is full of dust and broken bits of cogs. | * carlos is full of dust and broken bits of cogs. | ||
[[File:Gear-plotter-2-broken.jpg|thumb|left]] | |||
* carlos is like a siemens c1630 ([https://archive.org/details/SiemensC1613Manual/Siemens_C1613_Manual_0_Cover/ Operation manual in the webarchive]). | * carlos is like a siemens c1630 ([https://archive.org/details/SiemensC1613Manual/Siemens_C1613_Manual_0_Cover/ Operation manual in the webarchive]). | ||
* carlos has ten black screws on the bottom they're all the same. | * carlos has ten black screws on the bottom they're all the same. | ||
Revision as of 22:09, 30 October 2023
carlos (also known as xml-plotter-2)
2023-10-30 First inspection
- carlos is a BBC Goertz Metrawatt SE-283.
- carlos is full of dust and broken bits of cogs.
- carlos is like a siemens c1630 (Operation manual in the webarchive).
- carlos has ten black screws on the bottom they're all the same.
- carlos has four silver screws inside the pen holder, one facing up with a washer and three facing sideways behind where the pens go.
- carlos speaks two languages, HPGL and GGL.
- carlos knows the difference between ANSI and ISO.
First conclusion
- carlos needs a new ribbon cable and two new cogs at the x and y motors and a gasket on the paper motor.