User:Ssstephen/prototype/20230925

As the breeze kindles the fire hold me near, ooooh breeze in the air.

Set up a table. Plug in speakers. Electricity. Desk. Install Debian on Macbook Air. His name is now marcus he is my new friend. Install Arduino on marcus. try to set up nano. no. try to set up esp32 WROOM dev kit. yes. needed a python upgrade first. debian is unfamiliar but nice to try it. the tape on the screen was maybe too much. the tape on the desk will also be too much. structure. build it up and then destroy it all again. againtropy. breadcube is sick. something with the hard drive. grub. its better :)

go to /etc/apt/sources.list and change all the bullseye to bookworm.

sudo apt update
sudo apt full-upgrade

its more better.

esp32. check the pinout to find an analog in. GPIO36 works, its marked SVP on the board. SensVP on the pinout, i dont know what that means. connected it to a 3.5mm jack. loaded an "AnalogRead" example sketch. it seems to be reading something, cool.

break it down. think about it. work it out. think about it.

voltage divider.

in python use pyserial. import serial. look up docs. interpret the data. sensor = serial.open(dev/ttyusb0) or something like this. make a while loop where you read the serial. use an fft library to interpret it.

find notes from last year on how to send stuff from python to pen plotter.

badabingbadaboom.