Nooooootes

BIT

binary 二进制的，二元的 digit 数字
Binary digit bit is general tool of python to open files，count...

Bit shift

The simple act of opening an audio file in a text editor (or the reverse of opening a text as a digital audio) raises many questions. What exactly is a digital representation of a text, or a sound. The fact that once digital, bits can be as easily interpreted as text or as sound, or image, or other kind of data is at once fascinating, but also deceptively reinforces an idea of multimedia as inherantly bridging and mixing together media. Media formats, and their underlying digital representations, are highly specialized codes (algorithmic, legal) involved in the related processes of encoding and decoding.

A bit shift is the process by which the bits of some data value are shifted in position either "left" or "right" (that is away from or towards the "least significant" bit position). In a simple numerical representation of integers such a shift corresponds to multiplication and division by a power of two. This as a result of the design and working of the system of binary representation, with each column defined to represent powers of 2. The same operation performed on the characters of a text represented as ASCII code values would produce a much different result as the system of representation is structured very differently (with groupings of characters organized not so much by numeric relations, but by clusters of associated symbols and the conventions of the alphabet).

Raw media

We can use python to generate the "raw" bits of say an audio waveform or a bitmap image. Certain formats, such as audio WAV files or bitmap formats like TGA and BMP (when uncompressed) are easy to generate and manipulate with generic tools like python because the formats are often mostly "raw" sample or pixel data with a short preceding "header" that declares some key properties about the file (such as sampling rate, or image size).

generate sound by python

import wave, struct

filename = "output.wav"
nframes=0
nchannels=1
sampwidth=2 # in bytes so 2=16bit, 1=8bit
framerate=44100
bufsize=2048

w = wave.open(filename, 'w')
w.setparams((nchannels, sampwidth, framerate, nframes, 'NONE', 'not compressed'))

max_amplitude = float(int((2 ** (sampwidth * 8)) / 2) - 1)

# split the samples into chunks (to reduce memory consumption and improve performance)
#for chunk in grouper(bufsize, samples):
#    frames = ''.join(''.join(struct.pack('h', int(max_amplitude * sample)) for sample in channels) for channels in chunk if channels is not None)
#    w.writeframesraw(frames)

freq = 440
# this means that FREQ times a second, we need to complete a cycle
# there are FRAMERATE samples per second
# so FRAMERATE / FREQ = CYCLE LENGTH
cycle = framerate / freq


data = ''
for i in range(10): #正负波重复的次数
    for x in range(100):
        data += struct.pack('h', int(0.5 * max_amplitude))
    for x in range(100):
        data += struct.pack('h', int(-0.5 * max_amplitude))

w.writeframesraw(data)

w.close()

Generating "Raw" Images

Raw: This is the simplest of all ways to store images, just as "raw" bytes. For example one byte per pixel for grey scale or 3 bytes per pixel for RGB colour. There is no standard header and so even the size of the image needs to be specified for programs that might read the image.

Imagemagick can convert a bit-map file to a raw .dat – a not specific file type

convert image.png image.dat

And, it can also convert the .dat back into a bit-map

Andre Castro (talk) 10:14, 29 January 2018 (CET) if you run:

identify image.dat
img.dat PNG 2102x2799 2102x2799+0+0 8-bit RGB 256c 33.6KB 0.000u 0:00.000

Hence the image still with PNG headers

If you stick to the size, bit-depth and color profile of the original, the conversion will "preserve" the original

convert -depth 8 -size 2102x2799 rgb:image.dat image2.png

If you change those parameters, it is likely that the resulting bitmap will be something else!

convert -depth 8 -size 1000x1000 rgb:image.dat image2.png

convert -depth 24 -size 1000x1000 rgb:image.dat image2.png

convert -depth 8 -size 1000x1000 gray:image.dat image2.png

What we are doing here is, not unlike playing back audio files at bit-rate and sample-rates, different from the ones they were encoded in.

But we can convert from a raw audio to an image file with

convert -depth 8 -size 1000x1000 rgb:Zong3.raw Zong3.jpg

or even an animated gif

convert -depth 8 -size 1000x1000 rgb:Zong3.raw Zong3.jpg

What gets lost in a conversion ??

http://theghostinthemp3.com/

...

code experiments with Raw images

With a small amount of code, it's easy to dump out a stream of data as bytes:

# raw.py
import struct, sys
out = open("image.data", "wb")
for x in range(100): 
    out.write(struct.pack('B', 255))
    out.write(struct.pack('B', 0))
    out.write(struct.pack('B', 0))
    out.write(struct.pack('B', 128))

The "wb" option in the open command means that we want to "write" "binary" data (the default behaviour of read would be to read a text file).

When you run the script:

python raw.py

In Python, struct.pack is a way of converting a number (from 0 to 255) into it's corresponding binary representation as a "byte" or 8 bits (where 0 is all bits off 00000000 and 255 is all bits on 11111111). The code above loops 100 times outputting the bits of the sequence 255, 0, 0, 128.

255 0 0 128 255 0 0 128 255 0 0 128 255 0 0 128...

We can then use an image application like the GIMP to interpret this raw data as an image... In this case we tell the GIMP that it should interpret the bytes as being RGBA formatted pixels in the size 10 x 10:

It then interprets the numbers as a stream of pixels in the form:

RED GREEN BLUE ALPHA, RED GREEN BLUE ALPHA, ...

So for the code above:

255 (full) RED, 0 GREEN, 0 BLUE, 128 (half) ALPHA, ...

The result is an image 10 pixels wide by 10 pixels tall, where every pixel is red with 50% transparency.

Put a header on it

Working with raw data file can be inconvenient however since everytime you want to view the data as an image, you need to explicitly tell an application (such as GIMP) what the size and format of the image is. We can improve the situation by attaching preceding the raw data with a simple "header" to and follow the guidelines (which specify the order of the bytes) of a specific simple image format.

Targa is an early very simple format for images. It comes from an early manufacturer of video display cards, named Targa, who created a minimal format for files to display on their hardware. The format is still popular today in Game development and other communities for whom the simplicity of the format is useful for "wrapping" raw image data with a header so that it's self-contained and directly loadable by different programs without needing to explicitly specify information width and height and bit depth.

import struct, sys

out = open("image.tga", "wb")
width = 320
height = 240
header = struct.pack("<BBBHHBHHHHBB",0,0,2,0,0,8,0,0,width,height,32,1<<5)
out.write(header)
for y in xrange(height):
    for x in xrange(width):
        r = 0
        g = 0
        b = 0
        a = 128

        if y < 32:
            r = 255
            a = 255

        if x > 64 and x < 256:
            g = 255

        if y > 120:
            r = 128

        out.write(struct.pack('B', b))
        out.write(struct.pack('B', g))
        out.write(struct.pack('B', r))
        out.write(struct.pack('B', a))

This script outputs a TGA format, which has been opened in the GIMP and exported to PNG

Next: Raw image sequence

Resources

• This example is based on this Raw image example (in Portugese)