Clone RPi: Difference between revisions
Andre Castro (talk | contribs) (Created page with "Cloning a Raspberry Pi disk onto a image file can be quite useful, as it will safe you the time of installing the whole system, applications, etc. And you can have a copy of a...") |
Andre Castro (talk | contribs) No edit summary |
||
| Line 10: | Line 10: | ||
Select the SD-card (/dev/mmcblk/) | Select the SD-card (/dev/mmcblk/) | ||
https://cdn-learn.adafruit.com/assets/assets/000/032/661/medium640/raspberry_pi_device-menu-2.png | https://cdn-learn.adafruit.com/assets/assets/000/032/661/medium640/raspberry_pi_device-menu-2.png | ||
Select the larger partition (the one with loads of empty space) and reduce the empty space, leaving a bit of empty space (around 2000 MB) for temporary files,caches,log files,etc. | Select the larger partition (the one with loads of empty space) and reduce the empty space, leaving a bit of empty space (around 2000 MB) for temporary files,caches,log files,etc. | ||
https://cdn-learn.adafruit.com/assets/assets/000/032/665/large1024/raspberry_pi_root-resize.png | https://cdn-learn.adafruit.com/assets/assets/000/032/665/large1024/raspberry_pi_root-resize.png | ||
https://cdn-learn.adafruit.com/assets/assets/000/032/717/thumb160/raspberry_pi_root-resize-2.png | https://cdn-learn.adafruit.com/assets/assets/000/032/717/thumb160/raspberry_pi_root-resize-2.png | ||
When done close the Gparted | When done close the Gparted | ||
Revision as of 17:25, 8 March 2017
Cloning a Raspberry Pi disk onto a image file can be quite useful, as it will safe you the time of installing the whole system, applications, etc. And you can have a copy of an disk in an image, ready to be cloned onto another SD-card and ran.
the following steps will show how do this.
Resizing the partitions
Shutdown the Pi and remove its SD-card.
Insert the SD-card to you computer and run gparted software, as sudo.
Select the SD-card (/dev/mmcblk/)
Select the larger partition (the one with loads of empty space) and reduce the empty space, leaving a bit of empty space (around 2000 MB) for temporary files,caches,log files,etc.
When done close the Gparted
Clone
from SD-card to image file
sudo fdisk -l /dev/mmcblk0
Will give the length of each partition, in my case it is:
Disk /dev/mmcblk0: 3.8 GiB, 4025483264 bytes, 7862272 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0004a452
Device Boot Start End Sectors Size Id Type
/dev/mmcblk0p1 16 97727 97712 47.7M b W95 FAT32
/dev/mmcblk0p2 97728 3766271 3668544 1.8G 83 Linux
The "Start" and "End" units are sectors, and notice the sector size is given, 512 bytes.
You can start cloning using the dd cloning tool, the sector (or block size) bs and <>count</count> with the unit + 1. Cloning the SD-card (/dev/mmcblk0) to an image file (rpi.img).
sudo dd if=/dev/mmcblk0 of=rpi.img bs=512 count=3766272
When done eject the SD-card
from image file to card
Insert a new card to where you'll clone the image
sudo dd bs=4M if=rpi.img of=/dev/mmcblk0