User talk:Anna John

1.

It is a video loop. The loop itself is just a couple of seconds, however the short loop has been repeated in this edit such that the video runs for three minutes and twenty-two seconds precisely. The video comprises of single shots, which span .02 of second. Each shot is a scan of a single piece of paper that has been painted a particular colour, and in the instance in question, the colour is vermillion. Each piece of paper that has been scanned has been painted with gouache, with varying amounts of water added and taken from the palette; this random flow of the colour from piece to piece can be detected in the fast succession of frames in the video. Differing densities of colour and brushstroke give the video a sense of movement, as does the white border down the side of each scan. The movement appears to wash over the screen, as the border seems to vibrate.

2.

It is a kinetic sculpture. Three main components are involved. The first is the wooden structure which comprises of a found potters hand-building turntable or wheel, that basically involves a rotating square platform mounted on three legs. This object has been attached to a thick circular piece of wood, which has been painted black. At the base of the axis - on which the platform pivots, a small motor has been attached. The axle of the motor, when powered up, forces the platform to spin in an anti-clockwise direction. Atop the platform sits a roughly built, conically shaped ceramic object. It turns with the platforms motion. Suspended from the ceiling, above the rotating object, is a contact microphone with a domestic sewing needle soldered to it. Its positioned so that it scrapes along the surface of the ceramic object. The contact microphone is plugged into a small 15 watt amplifier which is mounted on the top of the gallery wall, out of sight – although the line of the microphone lead alludes to its presence, as does the sound of the scraping and bouncing of the needle along the objects surface. This line is also reflected in the wiring that is attached to the aforementioned motor, which lies along the surface of the gallery to the nearest available power outlet.

3.

It is a sculpture that stands at approximately 163 cm high. The two materials used are scrap metal and raku clay. Its basic structure could be described as a supportive stand and an object. The supportive stand is made entirely of scrap metal; its base a flat, rectangular metal plate of about 25x45cm, and extending up from its base two legs which rise up into the clay object at their ends. The legs are different shapes but both made from metal rods. The ‘back’ leg is a singular rod that is approximately 6cm in diameter. The front leg is an A-shaped combination of lengths, beginning as two separate entities from the base plate, meeting inside the sculpture at the top. The crossbar connects the two separate rods at a height of 45cm. The mean height of the legs would be around 148 cm high. The ceramic object at the top is an interpretation of a bull, with openings where its legs would be, it has a short tail, and a small perforation beneath the tail, and finally its head resembles a net-like drape or hood, which is adorned by a flat disc at the peak of the net-like rendition of its head. The body is rough and mostly white in its glaze with burn marks and some small cracks, and the head is a oxidised surface that moves through glassy shades of red, blue, silver and a dull gold.