User:E.zn/special issue X: Difference between revisions

From XPUB & Lens-Based wiki
Line 60: Line 60:
🢗 RFID 8x1 male header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 11mm female header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 female header [RFID]<br>
🢗 RFID 8x1 male header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 11mm female header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 female header [RFID]<br>
🢗 LCD 🢒🢒 4x1 female header<br>
🢗 LCD 🢒🢒 4x1 female header<br>
🢗 NANO 🢒🢒 2 15x1 female headers
<br><br><br>
<br><br><br>
</div><br><br>
</div><br><br>

Revision as of 14:28, 7 December 2019

Collaboration, Conflict & Consent

A two-day workshop with Eleanor Greenhalgh

Nor.gif

_ Applying various methods of decision-making and evaluating the outcomes.
_ Practicing listening in teams of three [each having a specific role].
_ Playing group games, like counting to 20.
_ Creating a consensual artwork.



Module

Building a module with a guest tutor Dennis de Bel


Txx.uo manual [draft]

Txx.uo Prototype 1.jpg


Txx.uo consolidates two contrasting radio frequency implementation modes: RFID reader scans the cards/objects containing RFID tags using radio waves and LCD screen displays a Q-code* [internationally established three-letter abbreviation used in radio communication].

*A particular Q-code denotes a question when it is followed by a question mark and references an answer [statement] when it's not:
QRU? : Have you anything for me?
QRU : I have nothing for you.

The RFID technology is used for object identification, authentication and security reasons, whereas Q-code is transmitted on a specific radio frequency by a radio operator and can be intercepted by anyone, who is tuned in to the same frequency.

This module converts the data received from a scanned card into a sound and binary code. This Binary signal is then transfigured into LED blinking and is also funneled to another module through an output channel. Top row of an LCD screen displays a specific question from the list of a Q-code, depending on a knob position and when receiving a signal from another module, a random Q-code answer is shown on the second row of the screen.


PCB Mika.png

Components and configuration


⯐ : Solder
🢗 : Plug into

__ PCB Txx.uo
__ Arduino Nano
⯐ 15x1 female header [x2] 🢒🢒 PCB/Nano
⯐ 15x1 male header [x2] 🢒🢒 Nano
⯐ 4x1 female header 🢒🢒 PCB/LCD1602-I2C
⯐ 1602 I2C LCD display 🢒🢒 4LCD1602-I2C
⯐ 8x1 Female Header 🢒🢒 RFID
⯐ 8x1 male header 🢒🢒 RFID
⯐ 10k ohm potentiometer 🢒🢒 A1 P in
⯐ LED 🢒🢒 LED2 D7
⯐ 220 ohm resistor 🢒🢒 R1
⯐ 220 ohm resistor 🢒🢒 R2
⯐ 10k ohm resistor 🢒🢒 R3
⯐ 3.5mm mono jack socket 🢒🢒 D5 o1 Out
⯐ 3.5mm mono jack socket 🢒🢒 D3 o2 Out
⯐ 3.5mm mono jack socket 🢒🢒 T5 o3 Out
⯐ 3.5mm mono jack socket 🢒🢒 A2 o4 Out
⯐ 3.5mm mono jack socket 🢒🢒 D8 o5 in
⯐ 2 pins of 4-pin tactile push button switch 🢒🢒 Reset
⯐ 5x2 male header 🢒🢒 JP [bridge the second row by soldering them together]
⯐ Vactrol : place the heads of LED and LDR in a heat shrink tube, so that they touch each other and are covered by a tube. Heat up the tube and then:
_ ⯐ LED 🢒🢒 LED 1 [long leg of LED 🢒🢒 square hole]
_ ⯐ LDR 🢒🢒 LDR

🢗 RFID 8x1 male header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 11mm female header 🢒🢒 8x1 11mm female header [bend the pins] 🢒🢒 8x1 female header [RFID]
🢗 LCD 🢒🢒 4x1 female header
🢗 NANO 🢒🢒 2 15x1 female headers




Txx.uo Final.jpeg