Archive Protocol/Video

From XPUB & Lens-Based wiki
Revision as of 16:16, 7 December 2015 by Castrobot (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

offline video archive - How is the video archive structured

VideoArchive.jpg

Where

The MMDC Video Archive is stored in MMDC DRIVE 01

And cloned to MMDC DRIVE 04

What

The Archive stores all the video documentation from MMDC, namely:

  • Gradshow (showreel)
  • Y1 Show
  • Symposium

How

The folders in the archive follow name the convention: MMDC_EVENT_YEAR_NAME-OF-EVENT

And inside they are further divided into media:

As for example:

├── MMDC_SHOWREEL_2012_EXCEPTION_HANDLING
├── PHOTO
│   │   ├── Amy
│   │   ├── Cola
│   │   ├── Daan
│   │   ├── Dusan
│   │   ├── Fako
│   │   ├── Inge
│   │   ├── Laura
│   │   ├── Laurier
│   │   ├── Lena
│   │   ├── Lieven
│   │   ├── Luis
│   │   ├── Quinten
│   │   ├── Sebastian
│   │   └── Tomas
│   └── VIDEO
│       ├── Amy
│       ├── Cola
│       ├── Daan
│       ├── Dusan
│       ├── Laura
│       ├── Laurier
│       ├── Lena
│       ├── Lieven
│       ├── Luis
│       ├── Quinten
│       ├── Sebastian
│       └── Tomas
├── MMDC_SHOWREEL_2013_NEWS_FROM_NOWHERE
│   ├── PHOTO
│   └── VIDEO
├── MMDC_SHOWREEL_2014_UNLIKED
│   └── VIDEO
├── MMDC_SHOWREEL_2015_TEMPED_BY_TOMORROW
│   ├── PHOTO
│   └── VIDEO
└── MMDC_Y1_SHOW_2015_ENCYCLOPEDIA-MEDIA-OBJECTS_V2
    ├── PHOTOS
    └── VIDEOS

Lacie 2big Thunderbolt

Modify the RAID mode

To be able to use different interchange stand-alone SATA drives, the Lacie chassis needs to be be set in JBOD (just a bunch of drives).

JBOD

From http://manuals.lacie.com/en/manuals/2big-tbt2/raid

http://manuals.lacie.com/_media/products/2big-tbt2/ill/ill-2big-tbt2-raid03.png?w=400&tok=b1df61

Set Lacie 2big to JBOD by:

  • Unmount the LaCie 2big's volumes from your computer (see Unmounting Your Drive).
  • Power off the device using the LED button (see LEDs and LED Power Button).
  • Remove the side panel for access to the RAID selection and confirmation buttons (see Getting Connected). The power supply must remain connected to the device.
  • Use the sharp end of the RAID selection tool to press and hold down the SELECT button.
  • Without releasing the SELECT button, turn on the product by pressing the front LED button.
  • All the RAID mode LEDs flash momentarily before the LED for the current RAID mode blinks on its own. Using the RAID selection tool, press the SELECT button to toggle between the modes.
  • When the LED for your preferred RAID mode is lit, use the RAID selection tool to press the CONFIRM button. IMPORTANT: Press CONFIRM within five seconds or the selection mode turns off and the configuration reverts to the current RAID.
  • Your computer prompts you to initialize the new RAID volume. You must initialize and format the hard drives for use with your computer (see Formatting).


TO DO

  • Change filenames so they they are all proceeded by the parent folder name.

e.g.

MMDC_SHOWREEL_2012_EXCEPTION_HANDLING_Amy.mov
  • Author should also have full name