Printing/xml-plotter-2
Revision as of 19:46, 30 October 2023 by Ssstephen (talk | contribs) (Created page with "=carlos= carlos is a BBC Goertz Metrawatt SE-283. carlos is full of dust and broken bits of cogs. carlos is like a siemens c1630 (?). carlos has ten black screws on the bottom they're all the same. carlos has four silver screws inside the pen holder, one facing up with a washer and three facing sideways behind where the pens go. carlos speaks two languages, HPGL and GGL. carlos knows the difference between ANSI and ISO. carlos needs a new ribbon cable and two ne...")
carlos
carlos is a BBC Goertz Metrawatt SE-283.
carlos is full of dust and broken bits of cogs.
carlos is like a siemens c1630 (?).
carlos has ten black screws on the bottom they're all the same.
carlos has four silver screws inside the pen holder, one facing up with a washer and three facing sideways behind where the pens go.
carlos speaks two languages, HPGL and GGL.
carlos knows the difference between ANSI and ISO.
carlos needs a new ribbon cable and two new cogs at the x and y motors and a gasket on the paper motor.